Pisound is an ultra-low latency high-quality sound card and MIDI interface specially designed for Raspberry Pi pocket computers.Buy Pisound - €99 Money-Back Guarantee + 12 Months Warranty + Worldwide Shipping
Pisound is an ultra-low latency high-quality sound card and MIDI interface specially designed for Raspberry Pi pocket computers.
Equipped with 192kHz 24-bit Stereo Input and Output driven by the legendary Burr-Brown chips, DIN-5 MIDI Input and Output ports, user-customizable button and bundled software tools, this little Raspberry Pi HAT will bring your audio projects to a whole new level!
Using Pisound you can turn your Raspberry Pi into a music instrument or effect, audiophile network player, portable recording studio, internet radio station or anything you can think of as long as it's audio related!
Pisound works great with Patchbox OS, Raspbian, ArchLinux, Pixel, Ubuntu Mate, Audacity, Pure Data, Sonic Pi, SuperCollider, Volumio and any other Linux software!
A simple but really sturdy and beautiful case for your Pisound and Raspberry Pi. The enclosure is cut from semi-transparent 3mm thick acrylic sheet.
Round engravings indicate the Output ports and the Volume potentiometer. Button cap, standoffs and screws are included in the package.
You can find the assembly instructions here.Buy Pisound Case - €16 Money-Back Guarantee + 12 Months Warranty + Worldwide Shipping
Pisound mounts directly onto Raspberry Pi, no additional power adapter or soldering is required.
You can use our Patchbox OS distribution or just install Pisound drivers by entering the following command in a terminal window:
And that's it. Done. Thank You!
Change Pisound settings anytime via
our configuration utility
'sudo pisound-config' command!
We used the legendary Burr-Brown Op-Amps, ADC and DAC chips in this little board to ensure flawless signal amplification and conversion. Of course, everything is hooked to the dedicated ultra-low noise power supply in order to get maximum signal fidelity and minimum interference.
Thanks to wide-range gain control, you can connect audio sources ranging from your bass guitar to a CD player or your modular synth. Using Stereo Output you can hook Pisound to any mixer, speakers or just plug in your headphones.
Furthermore, unlike usual MIDI solutions for Raspberry Pi ®, MIDI on Pisound is implemented using high speed SPI and a dedicated MCU for translating SPI data to serial MIDI byte streams and it's readily recognized in audio software as an ALSA Raw MIDI device.
|¼" (6.35mm) Stereo
|¼" (6.35mm) Stereo
|Sampling Frequency (Fs)
|48kHz, 96kHz, 192kHz
|Input/Output SNR @ 1kHz
|100kΩ || 2pF
|Input Gain (G)
|0dB to +40dB
|Input Clip LED
|Input Clip Voltage
|2.5V (Peak to Peak) *
|Full Scale RMS output @ 1kΩ
|0V to 2.1V
|Loopback Bandwidth (-3 dB)
|7.5Hz - 23kHz *
|Loopback THD @ 1kHz
|< 0.045% *
|DIN-5 Female Sockets
|MIDI Loopback Latency
|Input & Output
|Powered by Raspberry Pi
|< 300mA @ 5.1VDC
|56mm x 100mm